Quest E-Series 42 and 50 inch Residential Zero-Turn Mowers (2024)

Select a preferred dealer in order to see promotions for this series. Find a local dealer

As low as $3,899 or $115 per month USD

Request an Estimate

Simple, Easy Adjustments

With a single-point height adjust, it's easy to vary the Quest's cutting deck. Our 50- and 54-inch mowers are equipped with a foot lift-assist, which eases lifting and lowering the cutting deck. (Optional on 42-inch model)

Engine Protection

Standard, rear engine guard provides increased protection of critical engine components.

Fuel Tank Capacity

A single, 3.0-gallon tank with one fill location keeps you mowing longer with fewer fill-ups.

Commercial-Grade Tires

Standard on Quest mowers, the commercial-grade front caster tires and rear drive tires provide increased traction for superior handling.

Commercial Features

Exmark's Quest E-Series is a premium entry-level zero-turn mower. The proven commercial features have been adapted for consumer use including the tires and fabricated deck.

Professional Styling, Superior Comfort

The Quest E-Series mower has the commercial Exmark styling and provides a premium, ergonomic seat system that delivers a smooth, comfortable ride, even over uneven terrain.

• UPC 193308212470
• Starter Electric
• Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
• Caster Forks .25" thick caster yoke arms.
• Front Caster Tires 11 x 4.0-5 smooth-tread, pneumatic.
• Drive Tires 18 x 7.5-8 Turf Tech TL
• Parking Brake Automatic-actuated pawl brake.
• Tractor Frame Unibody, riveted 10-guage steel.
• Blade Spindles No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm (.67") diameter spindle shaft.
• Electrical 12 volt battery with 15-amp alternator
• Standard Features Cup holder and hitch
• Seat Units have 16" high-back (no armrests). Hinged mounting with spring suspension. Adjustment fore and aft 3" by loosening 2 bolts and sliding seat.
• Optional Features Hour meter and seat armrests

• Transmission Brand Hydro-Gear
• Engine Brand Kohler
• Transmission Speeds Infinitely Variable
• Engine Brand Kohler
• Engine Model KT725
• Engine Displacement 725
• Transmission Hydrostatic
• Speed Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
• Engine Series 7000 Series
• Fuel System Carbureted
• Drive Hydro-Drive
• Engine Speed 3,300 rpm
• Engine Spec 3097
• Air Filter Standard Engine Manufacturer's air filter
• Fuel Capacity 3-gallon (11.0-L), single fuel tank with single fill locations
• Drive Description Two Hydro-Gear ZT-2100 hydro static transmissions with no hoses and integrated cooling fans and integrated reservoir
• PTO Engagement Electromagnetic 80-ft-lb clutch
• Fuel Type Gas Carbureted
• Drive Wheel Release Allows unit movement without engine running.
• Fuel Indicator Translucent Visual
• Deck Lift Standard; hand lever deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
• Carb Compliant No
• Safety Package Operator Presence Controls (OPC) and drive system interlock.
• ROPS Optional Rigid ROPS with seat belt and latch.

• Deck Style Floating Deck
• Deck Style Description Series 2 fabricated and welded steel deck. Decks have side discharge standard with the option ot bag or mulch.
• Width / Cutting Deck 42"
• Deck Construction 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension.
• Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat.
• Blade Tip Speed Approximately 18,500 fpm.
• Blades 2 Blades at 21.6" Length

• Width 53.8 in. (137.0 cm)
• Height 45.6 in. (113.0 cm)
• Length 75.0 in. (191.0 cm)
• Curb Weight 415

Consumer 3 Year

Commercial 30 Day