If your Litter-Robot 4 isn’t working properly, you may need to reset it. Luckily, this is a quick and easy process. Just follow the steps below and you’ll have your Litter-Robot 4 up and running in no time.
To reset your Litter-Robot 4, follow these steps:
1. Unplug the power cord from the back of the unit.
2. Remove the waste bin.
3. Locate the reset button on the right side of the unit, above the power cord.
4. Use a paperclip or pen to press and hold the reset button for 3 seconds.
5. Plug the power cord back in and replace the waste bin.
6. Press the power button to turn the unit back on.
Table of Contents
How do you force a Litter-Robot to reset?
If your unit is not working properly, you may need to reset it. To do this, press the reset button firmly and quickly, without putting any other pressure on the unit. This should fix the problem and get your unit back up and running.
If you are adding litter, removing waste, or moving the unit, it is important to always press Reset. This will clear any status and allow you to troubleshoot if necessary.
Why is my Litter-Robot not working
It’s important to check the bonnet tabs on your base unit regularly to ensure that they are secure. If they are not, the unit will resume cycling 5 seconds after the bonnet is replaced. Additionally, be sure to check for excess weight, such as too much litter or waste. Litter should not surpass the raised fill line on the black rubber liner inside the globe.
If the Litter-Robot is not working properly, the first thing you should do is check the waste drawer. If it is full, empty it and insert a new liner. If the problem persists, press the RESET button to cancel the flashing blue light.
Why is my Litter-Robot stuck on cycle?
If your washing machine has a solid red light but is stuck in the cycle, this means that the machine has detected excess weight or the cat sensor laser was triggered. Things such as a piece of hair or a clump of laundry could trigger the sensor laser. To fix this, simply remove the excess weight or laundry from the machine and restart the cycle.
If you’re getting the Cat Sensor Fault error, it’s likely because there’s too much weight in the globe. Make sure the litter level is at, or just below, the raised fill line. Once you’ve removed some litter, be sure to press the Reset button.
How do I unregister my Litter-Robot?
If you need to delete your Litter-Robot for any reason, follow these steps:
Open your app
Go to “Remote” and click “Delete my Litter-Robot”
Completely close the Litter-Robot app
Reset your Litter-Robot by unplugging it from the base while the unit is powered on.
If you are having trouble with your Litter-Robot, you can try the following:
-Open the app and delete the current unit, even if it is offline
-Force close (swipe away) the app
-Unplug the Litter-Robot from the back of the unit for at least 1 minute
-Plug the unit back in and allow to cycle fully
-Once the unit has reached a solid blue light ready status, open the app
How do I connect my Litter-Robot 4
If you’re having trouble connecting your Litter-Robot to WiFi, make sure you’re doing the following:
-Open the Whisker app and tap on the settings icon
-Tap on WiFi
-Find the Litter-Robot SSID and tap on it
-Input the password neverscoop
-Allow the device to establish a connection; the WiFi signal should be visible on the top left of the screen
The robot will begin a clean cycle when power is turned on. Press the Connect button to turn the WiFi ON or OFF. A long press, while at the home position, will initiate the onboarding process. Press the Cycle button to start a clean cycle.
How do you troubleshoot a Litter-Robot 4?
If the status bar is still solidroid completing a hard reset a literal about 4 may clear it to do a reset. Also, check for any updates that may be available for your phone.
If your motor’s lights are flashing, it could be caused by a faulty power supply or the motor itself. To check, first tighten the set screw on the motor. Then, check the voltage on the power supply with a multimeter. If the lights are still flashing, you probably need to replace the Hall Effect Sensor.
Why is my automatic litter box blinking blue
The blue light on the litter box indicates that the scoop cycle is in progress. Please check the litter box in 20 minutes to confirm the health counter increased by one.
It is important to know how to adjust the cat sensor on your Litter-Robot, as this will ensure that the unit is operating properly. To adjust the sensor, start by turning the unit off and unplugging the power jack. Next, remove the globe and waste drawer. Then, turn the base unit upside down and locate the rotatable foot. To make the cat sensor MORE sensitive, turn the foot 2 complete turns COUNTER CLOCKWISE. Finally, replace the globe and waste drawer and plug the power jack back in.
How do you fix a CATS sensor?
The ratchet and 9 mm socket are the tools you will need to remove the footnut inside the sandal. The inside nut is what holds the foot in place. To remove it, first loosen the nut with the ratchet. Next, use the socket to remove the footnut. Be careful not to damage the threads on the footnut. Finally, remove the foot from the sandal.
If you’re experiencing connection issues with your Litter-Robot, we recommend rebooting your router. To do this, complete close the Litter-Robot app and unplug your unit from the base (not the wall). Wait 15 seconds, then plug it back in and allow it to cycle until the solid blue light comes on (“Ready” status).
Can I trade in my Litter-Robot
We understand that some of our customers may be disappointed by this policy, but we hope that you will appreciate the efforts we make to ensure the safety and quality of our products. Thank you for your understanding.
We’re committed to providing the best possible experience for our customers, which is why we offer a 1-year warranty on our Litter-Robot products. You can extend this warranty for an additional 3 years for peace of mind. During the warranty period, we will repair your Litter-Robot at no charge, including free shipping both ways. If you have any questions or concerns, please don’t hesitate to contact us.
Why is my Litter-Robot 4 offline
If you’re still having trouble connecting your Litter-Robot to your home’s Wi-Fi network, please try the following:
Perform a hard reset on your Litter-Robot: Unplug the unit from the back of the base, wait 1 minute, then plug it back in and allow it to cycle
Check the app – if it still shows offline, please move on to the next step
Reboot your router.
In order to pause the Litter-Robot’s cleaning cycle, press any button on the control panel during the cycle. Press the cycle button again to resume the cycle.
What does red timing light mean on Litter-Robot
If you see a solid red light on your盛装待机, it means that the cat has been detected and the wait time countdown has begun. There is no need to take any action or press the Reset button to cancel the timing. If you see a flashing red light, it means that the cat has been detected in the robot for more than 30 minutes. If you see a Ping Pong Red light, it means that motion has been detected in the waste drawer.
The Litter-Robot 4 requires a 24 GHz WiFi signal and IPv4 or IPv6 addressing (5 GHz band not supported) Some features not available until late 2022.
Where is the sensor on Litter-Robot
The Litter-Robot is equipped with infrared emitters and sensors located above the Waste Drawer. These check if the drawer is full each time the Globe returns to the Home position. If the drawer is full, the Litter-Robot will automatically empty it.
If you have a drawer full of debris, it may cause the Drawer Full Indicator (DFI) to light up – even if there is no waste in the drawer. Make sure to clean your unit thoroughly and let it dry completely before reassembling it. If it’s not dry, the litter may clump prematurely and get clogged in the ports or litter pocket.
Why is the yellow light staying on on my Litter-Robot
The Roomba i7+ can enter an 8-hour sleep mode, indicated by both the yellow and blue lights being on together. The Roomba will automatically clean at the end of the 8 hours. Once the Roomba is back in the home position, only the blue light will be on.
In reality, a few pieces of cat litter down the drain probably won’t cause any damage right away but it could gradually build up over time and cause a blockage. If you have a lot of cats, it’s probably best to err on the side of caution and dispose of the litter in the trash instead.
Where are the sensors on Litter-Robot 4
The Litter-Robot is equipped with Weight Sensors located in the base of the unit. These Weight Sensors are used to detect and weigh the cat while it is inside the Globe. If additional weight is detected during a cycle, the Globe will stop. This feature is designed to keep your cat safe and ensure that the Litter-Robot is working correctly.
The oxygen sensor cost may vary from $20 to $100 depending on your car. The labor cost depends on your vehicle model and the mechanic you go to. A mechanic’s labor rates usually range from $50 to $150 an hour. It shouldn’t take them more than 30 minutes to replace the sensor, so it shouldn’t cost you more than that.
Warp Up
To reset your Litter Robot 4, open the top cover and press and hold the reset button for 3 seconds.
If your Litter-Robot 4 is not functioning properly, you can reset it by following these steps: unplug the unit, wait 10 seconds, then plug it back in. If the unit is still not functioning properly, you may need to replace the power cord.
